Torque Specs for 5.0L and Ford 8.8 Part Numbers

I often come across questions about rebuilding an 8.8 rear.  I've been keeping notes on the part numbrs.  I thought it would be a good idea to have them all in one place.

Here are part numbers for reference.  Prices are ballpark - likely out of date:

FMS-M-1225-B outer bearings and seals - 23.00

FMS-M-4700-C cobra carbon fiber clutch posi rebuild kit - 107.00

FMS-M-4700-B standard posi rebuild kit - 69.95

FMS-M-4210-B Ford Racing Ring and Pinion Installation Kits everything but the axel seals and bearings - $82.95

FMS-M-4210-C  Ford Racing Ring and Pinion Installation Kits everything - includes axel bearings and seals. 99.95

RAT-3008K Ratech Deluxe Ring and Pinion Installation Kits - evertying - includes axel bearings and seals.  109.95

Ford Racing M-4204-F288 - Ford Racing Traction-Lok Differentials 28 spline 194.75

Ford Racing M-4204-F318 - Ford Racing Traction-Lok Differentials 31 spline 259.95

Ford Racing M-4209-F308 - Ford Racing Ring and Pinion Sets - 3.08 ratio 189.69

Yukon gear solid spacer kit with shims:  YGA-55040

Yukon gear super shim set (clamshell) for carrier:  YGA-55002

ARP 3 inch press in wheel studs:  100-7703

Press Studs (ARP 3 inch 100-7703 24$ x 2)

Gears - 3:55 M-4209-88355 175$ New

Pinion nut M-4213-A 10 for 20$

Pinion solid spacer - 5.99$ bought two.  RMG-04-0011-1 (used Yukon kit instead)

Trick Flow® Differential Bearing Cap Stud Kits TFS-85101-1 39.99$

Fluid - Redline 75w90 full synthetic, no friction modifiers.  49$ for the gallon

8.8 spherical housing bushings -  2003-88 89.99$  (2003-POLY is the polyurethane is 39.99.)

Trutrac TT70P52670 or DTL-913A561

Axles Strange p3110

Pinion flange  E9SZ-4851-A or M-4851-c 40.00 eBay

Pinion Seal Timken 3604 12$

Inner / outer pinion bearing and race
        pinion outer race: TIMKEN M88010 3.43
        pinion outer bearing: TIMKEN M88048 5.05
        pinion inner race: TIMKEN M802011 6.82
        pinion inner bearing:  TIMKEN M802048 9.25

differential bearing and race TIMKEN SET36 11.06 need two
 
Cover:  Ford DR3Z-4033-B
cover vent:  4R3Z4022AA

Cover bolts
ARP 612-1250 differential cover bolts 5/16-18 1.25 stainless
ARP 651-1250 5/16"-18" x 1.250" Hex Black Bolt - bought these

Pinion nut with solid spacer 125 lb ft
main cap stud kit 100 foot pounds

Typical Gear ratios
3.08, 3.27, 3.55, 3.73, 4.10, 4.30, 4.56

https://geargambler.blogspot.com/2019/04/setting-pinion-depth.html

1350 pinion caps 45 ft/lb

==========================================================================
5.0L Torque Specs - ft/lbs unless otherwise noted.

Belhousing to engine bolts     28-38 ft/lbs
Camshaft sprocket bolt     40-45 ft/lbs
Camshaft thrust plate to engine block bolts     108-144 in/lbs
Crankshaft pulley to vibration damper bolts     35-50 ft/lbs
Cylinder head bolts    
  -1979-1992    
    --Step 1     55-65 ft/lbs
    --Step 2     65-72 ft/lbs
  -1993-up    
    --Step 1     25-35 ft/lbs
    --Step 2     45-55 ft/lbs
    --Step 3     75-85 ft/lbs
Differential shaft lock bolt     15-30 ft/lbs
Driveshaft U-joint to pinion flange bolts     70-95 ft/lbs
Exhaust manifold bolts     26-32 ft/lbs
Flywheel mounting bolts     75-85 ft/lbs
Front engine mount nuts     72-98 ft/lbs
Intake manifold to head bolts    
    --Step 1     96 in/lbs
    --Step 2     16ft/lbs
    --Step 3     23-25 ft/lbs
Intake manifold (upper intake to lower)     12-18 ft/lbs
Oil filter insert to engine block adapter bolt     20-30 ft/lbs
Oil pan mounting bolts    
  -1979    
    --Step 1 (Large bolts)     11-13 ft/lbs
    --Step 1 (Short bolts)     7-9 ft/lbs
    --Step 2 (Large Bolts)     15-17 ft/lbs
    --Step 2 (Short Bolts)     10-12 ft/lbs
  -1980 to 1987     9-11 ft/lbs
  -1988 to 1993     6-9 ft/lbs
  -1994-up     110-144 in/lbs
Oil pickup tube to main bearing cap nut     22-32 ft/lbs
Oil pickup tube to oil pump bolts    
  -1979 to 1987     10-15 ft/lbs
  -1988-up     12-18 ft/lbs
Oil pump mounting bolts     22-32 ft/lbs
Pinion bearing preload     8-14 in/lbs
Pressure plate to flywheel bolts     12-24 ft/lbs
Rocker arm fulcrm bolts     18-25 ft/lbs
Spark plugs     7-14 ft/lbs
Timing chain cover bolts     12-18 ft/lbs
Vibration damper to crackshaft bolt     110-130 ft/lbs
Wheel lug nuts     85-105 ft/lbs
rear caliper to axle adapter plates 40-50 ft lb
differential cover bolts 25 ft lb
front and rear upper control arm bolts = 80 ft lb
front lower control arm to k-member bolts 148 ft lb
front ball joint retaining nut 129 ft lbs
LCA to axle 70-100
LCA to frame 80-105
rear Shock, Top 25-30
rear Shock bottom 45-60
Upper control Arm to axle 70-100
Upper control arm to frame 80-105
front strut to spindle 140 to 190 ft lbs
rear control arms 75 ft lbs